365体育开户

Double-door precision oven

Publish time: 2020-01-09 09:22
Technical parameters of double door precision oven
First, the size of the box and the internal dimensions of the structure:
1. Internal dimensions : W1.2m × D0.6m × H1.0m ,     
, 2. Power supply: voltage 220V 50Hz ,      Heating power: about 10KW
控制器位于机台上方,不锈钢豪华拉手,配防爆锁门扣。 3. The controller is located on the top of the machine, with a stainless steel luxury handle and an explosion-proof lock.
内材质为SUS 镜面不锈钢,内附2 活动不锈钢网格层板,内腔洁净光滑,易于清洁且不留残渣,耐腐蚀性强。 4. The inner material is SUS mirror stainless steel, with 2 layers of movable stainless steel grid laminates inside . The inner cavity is clean and smooth, easy to clean without residue, and strong corrosion resistance. All internal materials are made of low-contamination materials, and the inner barrels are all welded without trace argon arc.
外材质为SECC钢板,板厚为1.2mm 精粉体烤漆处理。 5. The outer material is SECC steel plate, and the thickness is 1.2mm.
保温材质为进口高密度玻璃岩棉,隔热性好,*大限度地保证温度保温性,防密之迫紧材质为耐高温硅胶,可长时间承受300度以上的高温。 6. The heat preservation material is imported high-density glass rock wool, which has good heat insulation. It guarantees the temperature and heat insulation to a maximum extent. The material for tightness prevention is high temperature resistant silica gel , which can withstand high temperatures above 300 degrees for a long time.
Temperature control system
1. Temperature control is PID microcomputer automatic calculation PV / SV display at the same time, the required temperature can be freely set according to individual wishes within the allowable range of the machine temperature, and the accuracy of its temperature control can be ensured through the PID parameter setting in the table, The appropriate temperature control parameters can also be calculated by the system self-calculation in the table.
2.Temperature sensing force CA (K) TYPE     The output is 12V.
电流控制器为SSR无接点Relay,保持电流的高稳定性。 3. The current controller is an SSR contactless relay, which maintains high current stability.
发热材质为蜂窝式不锈钢发热管,无污染且使用寿命长。 4. The heating material is a honeycomb stainless steel heating tube, which is pollution-free and has a long service life.
温度范围: RT ~300℃ 5.Temperature range : RT ~ 300 ℃
3. Accuracy: control accuracy ± 0.5 ℃, distribution temperature ± 2.0 ℃ (no load)
Fourth, the air supply system
强制对流水平送风循环,风源由循环马达运转带动风轮经电热器,将热风由风道送至烤箱内部,且将使用后热风吸入风道成为源再度循环加热,由此减小能量损耗并保证箱内的温度均匀性,当门开、关动作引起扰动时,可借此送风循环系统迅速回复操作状态温度值. 1. Forced convection horizontal air circulation, the wind source is driven by the circulation motor to drive the wind wheel through the electric heater, the hot air is sent from the air duct to the inside of the oven, and the hot air is drawn into the air duct after use as a source to recirculate and heat, thereby reducing Energy loss and guarantee the temperature uniformity in the box. When the door opening and closing actions cause disturbance, the air circulation system can be used to quickly restore the operating state temperature value .
马达为台湾进口长轴耐高温型,功率为1HP50Hz 2. The motor is imported from Taiwan with a long shaft and high temperature resistance, and the power is 1HP50Hz.
风扇为多叶式渦轮型、强度高,内装有可调式导流风板,使风路运行更加顺畅流通。 3. The fan is a multi-blade turbine type, with high strength, and is equipped with an adjustable air guide plate, which makes the air path run more smoothly.
V. Heating rate: RT ~ 100 ℃, about 10 minutes.
Six, accessories
超高温保护, 无熔丝开关,保险丝,马达过载保护。 1. Ultra-high temperature protection , no fuse switch, fuse, motor overload protection.
计时器9999秒~9999小时(可HMS切换和小数点的位置设定) 2. Timer 9999 seconds to 9999 hours (HMS switching and decimal point position setting)